 |
 |
 |
 |
Magnetic sensor kit - Prop kit to detect the placement of 4 objects. Connects with simple jumpers with one button programming for the entire chain. Digital sensors can replace more sophisticated RFID detection systems. This system works great when the prop placements have some registration to the surface they sit on, ie a chess puzzle, etc. - Save time with wiring and instructions
- Silent operation
- Drive a maglock directly
- Includes 12V, 1A Power Supply
- 6 output modes: active high, active low, pulse high, pulse low, set and clear
- *New high sensitivity mode!
- Configurable sensitivity Solid state output switch
- Pluggable header
- Can be used for chess boards, simple placement props, multiple placement props, and anywhere else you want silent magnetic detection.
Controller Specifications
Input voltage
|
6 – 26V
|
Outputs
|
1 Solid State Relay, 24V (max), 2A
|
Hall Sensor
|
Digital
|
Processor
|
NXP/Freescale ARM Cortex M0+
|
Magnetic Specifications
Gauss Sensitivity
|
+/- 430 Gauss
|
|
Sample Magnet A,
.125”x.125”, N42
|
20G from .5” from surface.
|
D22
|
Sample Magnet B,
.25”x.25”, N42
|
107G from .5” from surface.
|
D44
|
Sample Magnet C,
. 375”x.50”, N42
|
62G from 1.0” from surface.
307G from .5” from surface.
|
D68
|
Sample Magnet D,
.5”x.5”, N52
|
69G from 1.75” from surface.
236G from 1.25” from surface.
|
D88-N52
|
When using the same magnet in two positions, the goal is to stay
within the sensitivity range but provide enough ‘margin on each side for
accurate detection and discretion (difference between the two). When combined with utilizing both poles, 4
or more combinations can be accurately detected.
|
Magnetic field calculator and magnets available at
https://www.kjmagnetics.com/
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
More Information
1. Please check out our knowledge base for both Escape Room Techs provided support documentation: https://bit.ly/2USxGTK
2. Our Escape Room Techs User Group is a great place to chat with fellow Bad ASS controller owners about how they are using the tech in their escape room: https://bit.ly/2V8fRPC
3. Like all our products, we are working hard to constantly make them even better. If you have an issue you do not see addressed in any of our documentation, feel free to reach out to our awesome support team and we can assist. Contact us here: https://bit.ly/2V8fRPC
|
|
 |
 |
 |
 |


|