Home > Kits
Sort By:
Page of 1
RFID Reader Kit, 4 position, Bad ASS Controller Indestructible Knob RFID Reader Kit, 4 position, FX450 Controller
Get started fast with a preconfigured RFID kit with the Bad ASS Controller and 4 FX200 RFID Readers,10 RFID tags (spares), and 10 ft of connection wire. Tired of knobs breaking in your props? We are too! Electronic knobs were not designed for the harsh world of escape rooms. That is why we created this device. Get started fast with a preconfigured RFID kit with the FX450 Controller and 4 FX200 RFID Readers,10 RFID tags (spares), and 10 ft of connection wire.
RFID Reader Kit, 4 position, FX350 Controller 4 Prop Match Kit - FX51A 4 Prop Match Kit - FX51D
Get started fast with a preconfigured RFID kit with the FX350 Controller and 4 FX200 RFID Readers,10 RFID tags (spares), and 10 ft of wire Prop kit to detect the placement of 4 objects. In many cases, this kit can replace more sophisticated RFID detection systems. Save money with the new digital version! Connects with simple jumpers. One button programming for the entire chain! Better alternative than using FX51A's chained together except when detectors are placed more than 1 foot from each other.

Prop kit to detect the placement of 4 objects. In many cases, this kit can replace more sophisticated RFID detection systems. This system works great when the prop placements have some registration to the surface they sit on.
Indestructible Knob 4x Half Inch Kit - IDKNOB Ethernet Escape Room Controller Kit W/ Button & Light (FX350) Bad ASS Controller Escape Room Controller Kit W/ Button & Light
Tired of knobs breaking in your props? We are too! Electronic knobs were not designed for the harsh world of escape rooms. That is why we created this device. Great pre-wired turn-key kit in the 1/2" configuration.

** This product has been replaced with the Bad ASS Controller version here. **

No programming required! Turn-key Kit! Get control to your escape room! The combination of a push button and a status light mounted on a stainless-steel wall plate creates a professional presentation and installation for remotely controlling your room. This rugged and simple design provides a user interface for your game master to control the room.

Combined with the FX350 Room Controller, the button and light typically are used to start a room and let the game master know when the room timer is running. However, when connected to the FX350 and appropriate room control software, the button and light can be configured to do most anything.

No programming required! Turn-key Kit! Get control to your escape room! The combination of a push button and a status light mounted on a stainless-steel wall plate creates a professional presentation and installation for remotely controlling your room. This rugged and simple design provides a user interface for your game master to control the room.

Combined with the Bad ASS Controller (BAC), the button and light typically are used to start a room and let the game master know when the room timer is running. However, when connected to the BAC and appropriate room control software, the button and light can be configured to do most anything.