Black case exclusively for our Bad Ass Controller

Just the box.

Mount your FX controller or other 72mm wide board on DIN rail inside a NEMA rated enclosure. DIN rail mounting is the standard for industrial enclosure electronics. Because the rail is mounted in your enclosure before any other electronics, any plastic and metal shavings can be cleaned out before you mount any electronics. Furthermore, because of it’s versatile, flexible, and universal nature, it allows the builder to rearrange items for optimal wiring, and replace components without turning screws (which can make more shavings in metal cabinets).

Mount your FX450 or other 72mm wide board on DIN rail. DIN rail mounting is the standard for industrial enclosure electronics. Because the rail is mounted in your enclosure before any other electronics, any plastic and metal shavings can be cleaned out before you mount any electronics. Furthermore, because of it’s versatile, flexible, and universal nature, it allows the builder to rearrange items for optimal wiring, and replace components without turning screws (which can make more shavings in metal cabinets).

Securely mount your FX350 with this enclosure. Suitable for applications where AC is involved, dusty areas, and attics.

9"x5.9"x3.4"(230mmx150mmx87mm) ABS body, clear plastic lid.

Comes with mounting points for the FX350.

Easily mount your FX350 or other 72mm wide board on a surface. Sometimes you just need to mount the board on the wall or in a prop and the environment provides sufficient protection or you don’t have the space. The surface mount adapter will protect the controller’s bottom side and provide an easily maintainable way to mount and adjust your controller as needed. If you need to mount your controller with wood screws, use this. It is NOT recommended to place wood screws (or other course, self-tapping screws) through a PCB. It can damage them and void your warranty.