Professional grade controller suitable for props or room control for escape rooms.

Tired of knobs breaking in your props? We are too! Electronic knobs were not designed for the harsh world of escape rooms. That is why we created this device.

2.3", 4 Digit, Numeric Display. Arduino M0 Core. I2C and UART Interfaces.

FX51 Holder and 1/2" or 3/4" Shaft Adapter with Magnet.

(FX board not included, shown for mounting illustration only.)

Gear prop! Great for steam punk or industrial looking rooms. Standard configuration is 24" x 24". It is composed of a steel frame and grate. The gears are aluminum with welded shafts.

Scale prop. Auto zero, user calibration. Ethernet/Room Control System over-rideable.

Configurable to 'solve' at any weight (within the scale's capability).

Use 8-Track cartridges in your puzzle tagged with RFID chips. When the right cartridges are placed in the correct slot, the puzzle is solved. Additional functionality can be realized with the push buttons to play an audio track which can be the clue or can be informative/educational.

This Bar Chart Prop allows players to find colored bars in the room, place them in the correct location, and solve the puzzle. All bars are held in place with magnets and are RFID tagged for proper placement.

LED infused dancing floor tiles! Each tile is pressure sensitive and the LED lighting pattern can be programmed into each one and create an interactive experience!

Minimum 4 tiles per order

Each tile is 24" square, and 2" thick.

Use hockey pucks to solve a puzzle! 12 RFID reader pockets hold 12 hockey pucks to solve the puzzle.

Designed for 12 readers that use hockey pucks as tags. Come with tagged hockey pucks and a spare set.

Uses clear business card holders to solve the puzzle. Each holder has room for a business card sized graphic.

Designed for 6-8 readers (8 in this version) that use acrylic blocks as tags. Come with tagged acrylic blocks and a spare set.

TV Display with RFID readers Prop. This integrates a large TV display with 3 RFID readers. Videos can be triggered remotely or by the RFID interaction.

Designed for 3 readers that use laundry detergent caps as tags. Come with caps.

Black case exclusively for our Bad Ass Controller

Just the box.

The FX51SEN is an advanced magnetic sensor (hall) capable of detecting magnets position and rotation.

Mount your FX controller or other 72mm wide board on DIN rail inside a NEMA rated enclosure.

Mount your FX450 or other 72mm wide board on DIN rail. DIN rail mounting is the standard for industrial enclosure electronics.

Securely mount your FX350 with this enclosure. Suitable for applications where AC is involved, dusty areas, and attics.

Knock-Knock Sensor

Dual, 8 input compare controller with individual outputs.

Our original escape room control system. Powered by a Beagle Bone Black, it provides the highest processing power we offer.

Extend I2C signals far!  Use one on either end.  I2C in -> I2C out.

I2C Distribution board for better layout of I2C cables.  

The FX200 RFID Reader is a networked reader designed for long range and/or high-count RFID reading puzzle designs.

Professional grade controller suitable for props or room control for escape rooms.

The FX51D is a reed switch replacement with an intelligent controller.

Expansion I/O for your FX series of escape game controllers. Up to 16 more ins and outs, 2 relays, and optional serial ports.

Take the hassle out of mounting lever switches.

Magnet Sensor kit; detect the placement of 4 objects.  Connects with simple jumpers. One button programming for the entire chain!

Tired of knobs breaking in your props? We are too! Electronic knobs were not designed for the harsh world of escape rooms. That is why we created this device. Great pre-wired turn-key kit in the 1/2" configuration.

Professional Room Activation Kit with Button(s) and Light(s). Based on our user configurable Intelligent Bad ASS Controller