Magnet Sensing Valve Game!Rotate knobs to match user defined positions. LED visual knob position feedback and win state. Easy to wire and install. User configurable through our web based interface...no programming!Kit also includes 4x sets of 10 NeoPixel LEDs
Contact us if you need more LEDs and other special configurations.
BAC Voltage Requirements: DC Power ONLY
(10 – 24) VDC
Inputs (0-7) Maximum Voltage:
Note: Approximately 100 pf of capacitance on inputs (0-3)
“ON” Voltage: (~7.3 VDC)
“OFF” Voltage: (~6.9 VDC)
“ON” Voltage: (~3.3 VDC)
“OFF” Voltage: (~2.3 VDC)
Outputs (0-5) Maximum Current:
500 mA maximum for each output channel
3000 mA (3 A) maximum cumulative output
30KV HBM 2K pulldowns
BAC Current Draw:
Note: This is the idle state current draw. The current draw will increase depending on the implementation and what kind of external devices the BAC is powering.
65 mA @24 VDC
120 mA @12 VDC
145 mA @10 VDC
Maximum AC Voltage Switching Capability:
*Caution - When using a relay to switch 120 VAC, proper enclosure is required. If planning to use the device to switch 120 VAC, please consult Escape Room Techs first, before attempting self implementation.
Maximum DC Voltage Switching Capability:
2 Relay Outputs (SPDT)
120 VAC, 10 A
30 VDC, 5 A
10/100BT Ethernet Support for Monitoring and Control
Note: All expansion capabilities are available through the FX45 expansion board.
Data Communication: Serial, I2C, HI-Drive I2C, Analog, RS485
Serial LED Driver (5 VDC & 12 VDC): NeoPixels (Individually addressable LED’s), LED’s
Atmel ARM M0+ (ATSAMD21G18)
Enclosed Case, Din Rail or Board Holder
PCB Length: 132mm (5-2/8")
PCB Width: 72mm (2-7/8")
PCB Height (With Headers): 34mm ( 1-5/16”)
Note: Connector J8 protrudes 9 mm past the right edge of the pcb which brings the total length of the device to 141mm (5-9/16”).
Case Length: 153.5mm (6-1/16”)
Case Width: 101.5mm (4”)
Case Height: 38.5mm (1-9/16”)